Page 8 - 数控外圆磨床综合样本

¾ 标准配置 Standard Configuration

整体套筒式大锥度高速、高精度砂轮主轴。径向跳动小于0.002mm、轴向窜动小于0.002mm。在一定磨
动压砂轮主轴 削条件下可达到加工表面Ra0.1 或更高表面粗糙度。
Dynamic pressure High speed and high precision wheel spindle with whole sleeve of large taper. The axial float is less than 0.002 mm, and
wheel spindle radial run-out is less than 0.002 mm. Under certain grinding conditions, the machined surface Ra0.1 or higher surface
roughness can be achieved.
双层可调锥工作台 加工长度500 型调整范围可达顺逆9 度、加工长度750 型为8 度。
Double-deck adjustable cone Adjustment range can reach clockwise/anticlockwise 9°of the fabrication length 500 type, and 8°of the fabrication
workbench length 750 type.
固定主轴头架 工 件 拨 盘 旋 转 ， 变 频 调 速 速 度 范 围 3 0 - 3 0 0 转 /分 。
The fixed spindle headstock Workpiece rotates by driving plate, the range of frequency conversion speed is 30 to 300 rpm.
导轨定时、定量润滑 保证机床导轨有可靠的润滑，使导轨精度可长久保持。适当的时间、适当的用油量出厂时已经设定完成。
Timing and ration lubrication Guarantee reliable lubrication of the guide rail, and maintain a permanent rail precision. The appropriate time and fuel
for the guide rail consumption have been set up in the factory.
单点金刚石笔式修整器 经济可靠的砂轮修整方式、可满足不同工件加工对砂轮的要求。
Single point diamond pen The economic and reliable way of grinding wheel dressing, meeting the requirements for grinding wheel of machining
dresser different workpieces.
冷却水箱 配装磁性分离器。
Cooling water tank Equipped with magnetic separator.
移动加工区域防护罩 实用简洁的安全装置。
Shield of the mobile Practical and concise safety device.
processing area
砂轮平衡架、平衡心轴、金刚笔、工件拨叉、顶尖、垫铁，配套齐全随机附件、开箱后就能工作。
随机附件
Accessories wheel gimbals, balanced spindle, diamond pen, workpiece fork, top, sizing block, fully furnished and it can work as
soon as opening the box.

¾ 选装配置 Optional equipments
可安装三爪、四爪卡盘，主轴回转精度轴向窜动小于0.002 mm 径向跳动小于0.002 mm，变
回转主轴头架 频调速速度范围20-200 转/分。
Rotary spindle It can be installed with three-jaw and four-jaw chucks, spindle rotation accuracy of the axial float is less
headstock than 0.002 mm, radial run-out is less than 0.002 mm, and frequency control speed range is of 20-200
rev / min.
头架可安装三爪、四爪卡盘。主轴回转精度轴向窜动小于 0.001 径向跳动小于 0.001，变频
头架 高精度 调速速度范围20-200 转/分。
系列 回转主轴头架
Headstock High-precision rotary It can be installed with three-jaw and four-jaw chucks, spindle rotation accuracy of the axial float is less
than 0.001 mm, radial run-out is less than 0.001 mm, and frequency control speed range is of 20-200
series spindle headstock
rev / min.
超高精度
回转主轴头架 轴向窜动小于0.0006 径向跳动小于0.0006，用于特殊精度工件的精加工。
Ultra-high precision The axial float is less than 0.0006 mm, radial run-out is less than 0.0006 mm, and it is used for the
rotary spindle finishing of special precision workpieces.
headstock
液动尾架(行程30) 液压控制尾架套筒退出弹簧夹紧工件。
Tailstock series
尾架系列 (30 travels) The sleeve exited by hydraulic control tailstock, and workpiece is clamped by the spring.
Tailstock
series 微动调锥尾架 准确方便的锥度调整机构。
Inching adjusting Accurate and convenient taper adjustment mechanism.
cone tailstock
工作台台面安装
单点金刚石笔修整器 用于异型工件对砂轮特殊形状的修整。
Installation of single-point diamond Finishing the special shapes of the grinding wheel when grinding abnormal shaped workpieces.
pen dresser on the table countertop
全封闭护罩 整齐大方的机床外形。
Totally enclosed shield Neat and generous appearance.
径向主动量仪 可根据用户需要配置。
The radial initiative meter Can be configured according to the needs of the users.
轴向定位器 可根据用户需要配置。
Axial Locator Can be configured according to the needs of the users.
数控系统 可根据用户需要配置。
CNC system Can be configured according to the needs of the users.
专用液动、气动卡盘/专用顶尖/专用工件托架。针对大批量生产的需要，开发专用的工装夹
具，达到高精度、高效率、低消耗、低劳动强度。
专用功能部件
Dedicated function units Dedicated hydraulic, pneumatic chuck / dedicated top / special workpiece bracket. The dedicated work
fixture for the need of high-volume production, which can achieve high-precision, high-efficiency, low
consumption, and low labor intensity.
砂轮自动在线平衡装置、砂轮消空程装置、防碰撞装置、恒温主轴油箱、恒温水箱。可根据
用户需要配置。
其他 Other Grinding wheel automatic balancing device, wheel eliminate idle device, the anti-collision device,
thermostat spindle fuel tank, thermostatic water tank. Can be configured according to the needs of the
users.