Page 4 - 数控外圆磨床综合样本
P. 4
¾ 标准配置 Standard Configuration
整体套筒式动静压高速、高精度砂轮主轴。径向跳动小于0.002mm、轴向窜动小于0.002mm。在一
定磨削条件下可达到加工表面Ra0.1 或更高表面粗糙度。
砂轮主轴 High speed and high precision wheel spindle with whole sleeve of hydrostatic dynamic. The axial float is less than
Grinding wheel 0.002 mm, and radial run-out is less than 0.002 mm. Under certain grinding conditions, the machined surface
Ra0.1 or higher surface roughness can be achieved.
双层工作台 平—V 贴塑导轨,刚性好、精度高、锥度调整方便。
Double-deck workbench Flat-V plastic coated guide rail with good rigidity, high precision, and it is convenient to adjust the conicity.
主轴固定工件拨盘旋转 ,由交流变频电机驱动无级调速,以适应不同工件的磨削。
固定主轴头架
The fixed spindle headstock Spindle fixed workpiece rotated by driving plate with stepless speed variation driven by AC inverter motor, so as
to adapt the grinding of different workpieces.
手动尾架 主轴为套筒式结构,手动退回弹簧夹紧。
Manual tailstock The spindle is the sleeve type structure, exited by manual method, and clamped by the spring.
安装在头架后端,单点金刚笔修整砂轮,可实现复杂砂轮型面的精密修整。
砂轮修整器
Grinding wheel dresser installed at the back-end of the headstock, dressing grinding wheel with single point diamond pen, which can
achieve the precision dressing of the complex grinding wheel surfaces.
磁性分离、纸质过滤器,高精度的过滤方式,保证磨削质量的要求。
两级过滤水箱
Two-stage filter tank magnetic separation, the paper filter, and high-precision filtering method, ensure the requirements of the
grinding quality.
全封闭护罩,加装内部空气过滤装置,过滤对操作技师、对机器设备有害的水汽、油气、粉尘。
机床防护
The machine protection Totally enclosed shield,installed internal air filtration devices, which can filter the harmful water vapor, oil gas, and
dust to machinery and equipment and the operation technicians.
砂轮平衡架、平衡心轴、金刚笔、工件拨叉、顶尖、垫铁,配套齐全随机附件、开箱后就能工作。
随机附件
Accessories wheel gimbals, balanced spindle, diamond pen, workpiece fork, top, sizing block, fully furnished and it can work
as soon as opening the box.
¾ 选装配置 Optional equipments
砂轮主轴 高速动静压主轴(CBN 砂轮线速度,80-120 m/s)。
The wheel spindle high-speed dynamic and static pressure spindle (CBN wheel linear velocity, 80-120 m / s).
砂轮 最大直径500/750 mm,最大宽度可大于120 mm。
Grinding wheel Maximum diameter is of 500/750 mm, maximum width can be greater than 120 mm.
可安装三爪、四爪卡盘,主轴回转精度轴向窜动小于0.002 mm 径向跳动小于0.002 mm,变
频调速速度范围20-200/30-300 转/分。
回转主轴头架
Rotary spindle headstock It can be installed with three-jaw and four-jaw chucks, spindle rotation accuracy of the axial float is less
than 0.002 mm, radial run-out is less than 0.002 mm, and frequency control speed range is of
20-200/30-300 rev / min.
头架 头 架 可 安 装 三 爪 、 四 爪 卡 盘 。 主 轴 回 转 精 度 轴 向 窜 动 小 于 0 .0 0 1 径 向 跳 动 小 于 0 .0 0 1 , 变 频
系列
Headstock 高精度回转主轴头架 调 速 速 度 范 围 0 - 2 0 0 转 /分 。
It can be installed with three-jaw and four-jaw chucks, spindle rotation accuracy of the axial float is
High-precision rotary
series
spindle headstock less than 0.001 mm, radial run-out is less than 0.001 mm, and frequency control speed range is of
0-200 rev / min
超高精度回转主轴头架 轴向窜动小于0.0006 径向跳动小于0.0006,用于特殊精度工件的精加工。
Ultra-high precision rotary The axial float is less than 0.0006 mm, radial run-out is less than 0.0006 mm, and it is used for the
spindle headstock finishing of special precision workpieces.
液动尾架(行程30mm)、液动长行程尾架(行程60mm)、液动调锥尾架、手动密集轴承尾架、
尾架系列 手动调锥尾架。
Tailstock series Hydraulic tailstock (stroke 30mm), hydraulic long stroke tailstock (stroke 60mm), hydraulic adjusting
cone tailstock, manually intensive bearing tailstock, manually adjusting cone tailstock.
修整器系列 滚轮修整器、台面安装修整器、多方向金刚笔修整器。
Dresser series Wheel dresser, countertops installation dresser, and multi-directional diamond pen dresser.
各种品牌各种功能的径向量仪
Radial instruments of various functions 可根据用户需要配置。
Can be configured according to the needs of the users.
and brands
轴向定位器 可根据用户需要配置。
Axial Locator Can be configured according to the needs of the users.
数控系统 可根据用户需要配置。
CNC system Can be configured according to the needs of the users.
专用液动、气动卡盘/专用顶尖/专用工件托架。针对大批量生产的需要,开发专用的工装夹
具,达到高精度、高效率、低消耗、低劳动强度。
专用功能部件
Dedicated function units Dedicated hydraulic, pneumatic chuck / dedicated top / special workpiece bracket. The dedicated work
fixture for the need of high-volume production, which can achieve high-precision, high-efficiency, low
consumption, and low labor intensity.
砂轮自动在线平衡装置、砂轮消空程装置、防碰撞装置、恒温主轴油箱、恒温水箱。可根据
用户需要配置。
其他 Other Grinding wheel automatic balancing device, wheel eliminate idle device, the anti-collision device,
thermostat spindle fuel tank, thermostatic water tank. Can be configured according to the needs of the
users.